Intellijel Mixup Chainable Mono/Stereo Audio Utility Mixer Module


  • Our Price
  • Regular price $89.00





OUT OF STOCK BUT WE CAN GET IT
• Ship time varies by availability - C19 delays possible
• Order now to reserve yours ~ risk free


Strike A Balance in Your Mix With The Intellijel Mixup Chainable Mono/Stereo Audio Utility Mixer Module

Mixup is a versatile, expandable audio mixer for eurorack format. It has eight inputs (6 on the front panel)  and two outputs. Inputs 1 and 2 are single-channel mono inputs, each with its own mute switch and level control; Input 3 is a dual-channel stereo input with a shared mute and level control; and input 4 is an auxiliary unity-gain, non-mutable stereo input.

Using bus connectors on the back panel, you can chain multiple Mixups together in series, giving you the ability to mix together even more inputs, or to create sub-mixes for routing around larger systems.

Because Mixup is designed specifically for audio (and not for CV mixing), it uses AC-coupled circuitry (which reduces the potential for ‘pops’ when muting and unmuting audio), and it uses audio-grade, logarithmic attenuators for a smooth, even response across the entire volume range.

Controls

  • LEVEL​ ​1​ - This attenuator reduces the IN 1​ mono audio level sent to both MIX​ outputs.
  • LEVEL​ ​2​ - This attenuator reduces the IN 2​ mono audio level sent to both MIX​ outputs.
  • LEVEL​ ​3​ - This attenuator reduces the IN 3L​ and IN 3R​ stereo audio level sent to the MIX​ outputs.
  • MUTE​ ​1​ - In the down position, this switch mutes IN 1​ - removing it from the MIX outputs.
  • MUTE​ ​2​ - In the down position, this switch mutes IN 2​ - removing it from the MIX outputs.
  • MUTE​ ​3​ - In the down position, this switch mutes both IN 3L​ and IN 3R​ - removing them from the MIX​ outputs.
  • CLIP​ ​LED​ - This LED lights when the sum of all the inputs (from the front panel jacks plus the rear panel serial bus) causes either side of the stereo MIX​ output to clip. Obviously, the more inputs you feed into Mixup (or the more Mixups you feed into each other), the greater the potential to overdrive the Mix bus. So if the CLIP LED lights, consider reducing the various LEVEL​ knobs to maintain a clean output (unless you want distorted audio, of course)

Inputs ​& ​Outputs

  • IN​ ​1​ - Mono audio input 1. Mixup routes the audio from IN​ ​1​ to both the MIX​ ​L​ and MIX R outputs. It can be muted with the MUTE​ ​1​ switch, and its audio level is determined by the LEVEL​ ​1​ knob.
  • IN​ ​2​ - Mono audio input 2. Mixup routes the audio from​ ​IN​ ​2​ to both the MIX​ ​L​ and MIX R outputs. It can be muted with the MUTE​ ​2​ switch, and its audio level is determined by the LEVEL​ ​2​ knob.
  • IN​ ​3L​ - This is the left side of stereo audio input 3. Mixup routes the audio from IN 3L​ to the MIX L​ output. It can be muted (along with IN 3R​) using the MUTE 3​ switch, and its audio level (along with IN 3R​) is determined by the LEVEL 3​ knob. If nothing is plugged into IN 3R​, then IN 3L​ acts like a mono input, and Mixup routes its signal to both the MIX L​ and MIX R​ outputs.
  • IN​ ​3R​ - This is the right side of stereo audio input 3. Mixup routes the audio from IN 3R to the MIX R​ output. It can be muted (along with IN 3L​) using the MUTE 3​ switch, and its audio level (also along with IN 3L​) is determined by the LEVEL 3​ knob. If you wish to use input 3 for mono instead of stereo, simply plug a mono signal into the IN 3L​ jack, and leave the IN 3R​ jack unconnected.
  • IN​ ​4L​ - This is the left side of stereo audio input 4. Mixup routes audio directly from IN 4L to the MIX L​ output, and has neither a mute switch nor a level knob. If nothing is plugged into IN 4R​, then IN 4L​ acts like a mono input - appearing at both the MIX L​ and MIX R outputs.
  • IN​ ​4R​ - This is the right side of stereo audio input 4. Mixup routes audio directly from IN 4R​ to the MIX R​ output, and has neither a mute switch nor a level knob. If you wish to use input 4 for mono instead of stereo, simply plug a mono signal into the IN 4L​ jack, and leave the IN 4R​ jack unconnected.
  • MIX​ ​L​ - This is the mixed audio output of all audio on Mixup’s left bus. This includes audio from IN 1​, IN 2​, IN 3L​,​ ​IN 4L​, plus all left-channel audio from other Mixups you might connected to its back panel CHAIN-IN​ connector.
  • MIX​ ​R​ - This is the mixed audio output of all audio on Mixup’s right bus. This includes audio from IN 1​, IN 2​, IN 3R​ (or IN 3L​ if IN 3R​ is not connected), IN 4R​ (or IN 4L​ if IN 4R is not connected), plus all right-channel audio from other Mixups you might connect to its back panel CHAIN-IN​ connector.
  • Width: 6 hp

    Manufacturer: Intellijel
    Model: MIXUP-3U
    Warranty: See manufacturer website for details
    SKU: I513153-N-0
    Listing ID: NA90475