{"product_id":"dynacord-v600-2-two-channel-600w-power-amplifier-for-commercial-installations","title":"Dynacord V600:2 Two-Channel 600W Power Amplifier for Commercial Installations","description":"\u003c!-- more --\u003e\n\u003c!-- split --\u003e\u003cp\u003e\n\u003c\/p\u003e\u003cdiv class=\"video-wrap\"\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4tvuk1tAjUk?si=kd2Ji-2zB3pP6Rht\u0026amp;status=ok\u0026amp;rel=0\" frameborder=\"0\" listtype=\"playlist\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003ch4\u003eFlexible Installation Power – The Dynacord V600:2 2-Channel 600W Power Amplifier\u003c\/h4\u003e\n\u003cp\u003eThe Dynacord V600:2 is a compact two-channel power amplifier designed for small to mid-sized fixed installations. Delivering 600 watts of total output power from a 1 RU, half-rack-width chassis, it combines flexible power sharing, direct-drive 70 V\/100 V operation, integrated signal processing, and efficient thermal management for professional installed sound systems.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e600 W total output power with two amplifier channels\u003c\/li\u003e\n\u003cli\u003epowerTANK technology allows flexible asymmetric power allocation between channels\u003c\/li\u003e\n\u003cli\u003eDirect-drive 70 V\/100 V output eliminates the need for output transformers\u003c\/li\u003e\n\u003cli\u003eSupports 4-ohm, 8-ohm, 70 V, and 100 V loads selectable per channel\u003c\/li\u003e\n\u003cli\u003eIntegrated signal processing with input routing, selectable HPF and LPF, and peak limiter\u003c\/li\u003e\n\u003cli\u003eecoRAIL technology reduces idle power consumption\u003c\/li\u003e\n\u003cli\u003eAuto Power Down reduces standby consumption to less than 1 W\u003c\/li\u003e\n\u003cli\u003edualCOOL thermal management combines convection and intelligent forced-air cooling\u003c\/li\u003e\n\u003cli\u003eCompact 1 RU, half-rack-width design\u003c\/li\u003e\n\u003cli\u003eCan be installed on a tabletop, in a 19-inch rack, under a surface, or on a wall\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eFlexible powerTANK Power Sharing\u003c\/h4\u003e\n\u003cp\u003eDynacord powerTANK technology acts as a flexible power reservoir, giving the V600:2 access to its full 600 watts of available output power. Rather than limiting each channel to a fixed amount of power, the amplifier can allocate power asymmetrically between channels based on the requirements of the connected loudspeakers.\u003c\/p\u003e\n\u003ch4\u003eDirect-Drive Low- and High-Impedance Systems\u003c\/h4\u003e\n\u003cp\u003eThe V600:2 supports 4-ohm, 8-ohm, 70 V, and 100 V operation, selectable per channel. Direct-drive 70 V\/100 V capability allows distributed loudspeaker systems to be powered without the need for external output transformers, making the amplifier suitable for a wide range of commercial and installed audio applications.\u003c\/p\u003e\n\u003ch4\u003eIntegrated Signal Processing\u003c\/h4\u003e\n\u003cp\u003eBuilt-in signal processing includes input routing, selectable 24 dB\/octave high-pass and low-pass filtering, flat response operation, and peak limiting. These tools help optimize the amplifier for different loudspeaker systems and installation requirements.\u003c\/p\u003e\n\u003ch4\u003eEfficient Power and Cooling\u003c\/h4\u003e\n\u003cp\u003eecoRAIL technology helps minimize energy use when no signal is present, while Auto Power Down can reduce standby consumption to less than 1 watt. Dynacord dualCOOL thermal management uses convection cooling during lighter operation and intelligent multi-speed forced-air cooling when installed in tighter rack spaces or under demanding thermal conditions.\u003c\/p\u003e\n\u003ch4\u003eFlexible Installation\u003c\/h4\u003e\n\u003cp\u003eThe V600:2 occupies only 1 RU in height and half a rack width. Two amplifiers can be installed side by side in a single rack space, while additional mounting options support tabletop, under-surface, and wall installations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eSPECIFICATIONS\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003ePower and Amplification\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal Output Power: 600 W\u003c\/li\u003e\n\u003cli\u003eChannels: 2\u003c\/li\u003e\n\u003cli\u003eOutput Power @ 4 Ohms, All Channels Driven: 2 x 300 W\u003c\/li\u003e\n\u003cli\u003eOutput Power @ 8 Ohms, All Channels Driven: 2 x 300 W\u003c\/li\u003e\n\u003cli\u003eOutput Power @ 70 V, All Channels Driven: 2 x 300 W\u003c\/li\u003e\n\u003cli\u003eOutput Power @ 100 V, All Channels Driven: 2 x 300 W\u003c\/li\u003e\n\u003cli\u003eMaximum Output Power per Channel: 500 W @ 4 ohms \/ 70 V, 600 W @ 8 ohms \/ 100 V with power sharing at minimum impedance\u003c\/li\u003e\n\u003cli\u003eMaximum Output Voltage per Channel: 40.0 V RMS @ 4 ohms, 56.0 V RMS @ 8 ohms, 70.7 V RMS @ 70 V, 100 V RMS @ 100 V\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity: +6 dBu at LEVEL 0 dB \/ 0 dBu at LEVEL +6 dB\u003c\/li\u003e\n\u003cli\u003eMaximum Input Level: +18 dBu\u003c\/li\u003e\n\u003cli\u003eDirect Drive 70 V\/100 V: Yes\u003c\/li\u003e\n\u003cli\u003ePower Tank: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eAcoustic Performance\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: Filter-selectable, -3 dB referenced to 1 kHz\u003c\/li\u003e\n\u003cli\u003e4\/8 Ohm Frequency Response: HP 30\/100\/150 Hz to 20 kHz, LP 30 to 150 Hz\u003c\/li\u003e\n\u003cli\u003e70\/100 V Frequency Response: HP 50\/100\/150 Hz to 20 kHz, LP 50 to 150 Hz\u003c\/li\u003e\n\u003cli\u003eTHD+N: \u0026lt;0.1% at 1\/8 rated output power, 1 kHz\u003c\/li\u003e\n\u003cli\u003eSignal-to-Noise Ratio: \u0026gt;100 dB, A-weighted\u003c\/li\u003e\n\u003cli\u003eCrosstalk: \u0026lt;-70 dB @ 4 ohms to \u0026lt;-95 dB @ 100 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSignal Processing\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput Routing: Yes\u003c\/li\u003e\n\u003cli\u003eHigh-Pass Filter: 24 dB\/octave, selectable 100\/150 Hz\u003c\/li\u003e\n\u003cli\u003eLow-Pass Filter: 24 dB\/octave, selectable 150 Hz\u003c\/li\u003e\n\u003cli\u003eFlat Mode: Yes\u003c\/li\u003e\n\u003cli\u003ePeak Limiter: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eConnections\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog Input: 6-pin Euroblock 3.81 mm male\u003c\/li\u003e\n\u003cli\u003eParallel Audio Connection: 1 x RJ45, AES72-1E line in\/thru\u003c\/li\u003e\n\u003cli\u003eLoudspeaker Output: 4-pin Euroblock 5.08 mm female\u003c\/li\u003e\n\u003cli\u003eControl Port: 5-pin Euroblock\u003c\/li\u003e\n\u003cli\u003eMains Connection: IEC C14\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eControl and Monitoring\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote On\/Standby: Yes\u003c\/li\u003e\n\u003cli\u003eReady\/Fault Relay: Galvanically isolated, maximum 30 V DC \/ 500 mA DC\u003c\/li\u003e\n\u003cli\u003eChannel Indicators: Signal, Limit, Fault LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eProtection\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Limiters: Yes\u003c\/li\u003e\n\u003cli\u003eHigh Temperature Protection: Yes\u003c\/li\u003e\n\u003cli\u003eDC Protection: Yes\u003c\/li\u003e\n\u003cli\u003eHF Protection: Yes\u003c\/li\u003e\n\u003cli\u003eShort Circuit Protection: Yes\u003c\/li\u003e\n\u003cli\u003eBack-EMF Protection: Yes\u003c\/li\u003e\n\u003cli\u003ePeak Current Limiters: Yes\u003c\/li\u003e\n\u003cli\u003eInrush Current Limiters: Yes\u003c\/li\u003e\n\u003cli\u003eMains Over\/Under Voltage Protection: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 100 V to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower Consumption: 115 W at 1\/8 rated output power\u003c\/li\u003e\n\u003cli\u003eIdle Consumption: \u0026lt;12 W with ecoRAIL and no signal\u003c\/li\u003e\n\u003cli\u003eStandby Consumption: \u0026lt;1 W with Auto Power Down\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eCooling and Environment\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCooling: dualCOOL convection and intelligent multi-speed forced-air cooling\u003c\/li\u003e\n\u003cli\u003eAmbient Operating Temperature: -5°C to +45°C \/ +23°F to +113°F\u003c\/li\u003e\n\u003cli\u003eIEC Protection Class: Class I grounded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003ePhysical Specifications\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRack Height: 1 RU\u003c\/li\u003e\n\u003cli\u003eChassis Width: Half-rack\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 44.2 x 218 x 269.5 mm \/ 1.74 x 8.6 x 10.6 inches\u003c\/li\u003e\n\u003cli\u003eNet Weight: 2.1 kg \/ 4.6 lb\u003c\/li\u003e\n\u003cli\u003eMounting Options: Tabletop, 19-inch rack, under-surface, or wall mounting\u003c\/li\u003e\n\u003cli\u003eMaterial Number: F.01U.410.738\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\n\n\nManufacturer: Dynacord\u003cbr\u003eModel: V600:2-US\u003cbr\u003eSKU: I780550-N-1-WHXC\u003cbr\u003eUPC: 800549373098\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cb\u003eWe are Chuck Levin's Washington Music Center\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSince 1958, Chuck Levin’s Washington Music Center has been the trusted destination for musicians and audio professionals across Maryland, Virginia, and Washington, D.C. Family-owned and operated, our legendary music store delivers Everything in Music®—from instruments and recording gear to pro audio, rentals, and repair services.\u003c\/p\u003e\u003cp\u003eOur team of musicians and industry experts lives and breathes gear, helping you build the perfect setup for your next performance, studio session, or installation. As an authorized dealer for top brands, we also offer our award-winning CHUCKSCLUSIVE line—exclusive, limited-edition instruments and collaborations recognized with the NAMM Top 100 Dealer Innovation Award for redefining what a music retail experience can be.\u003c\/p\u003e\u003cp\u003eChuck Levin’s isn’t just a store—it’s a community built by players, engineers, and creators who share a lifelong passion for sound. Stop by our legendary Wheaton, MD showroom or contact us anytime for expert advice, product questions, or the best possible deal on your next piece of gear.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Dynacord","offers":[{"title":"Default Title","offer_id":43924081311807,"sku":"I780550-N","price":939.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/0972\/9087\/files\/94f12c61-07d1-430f-b013-4138d484797b.png?v=1789970195","url":"https:\/\/chucklevins.com\/products\/dynacord-v600-2-two-channel-600w-power-amplifier-for-commercial-installations","provider":"Chuck Levin's Washington Music Center","version":"1.0","type":"link"}