Everything In Music - Since 1958



Lab Gruppen Lucia 120/2M Compact 2 x 60 W Matrix Amplifier for Installation Applications


  • Our Price
  • $275.28
  • Regular price MSRP: $550.00




*IN STOCK - READY TO SHIP



Get Great Sound, Flexibility, And Ease Of Use With The Lab Gruppen Lucia 120/2 Compact 2x60 With Matrix Amplifier For Installation Applications

Lucia 120/2M Incorporates Ease of Install with 2 X 60 W of Decentralized Power in a Compact, Energy Star Compliant Amplifier.

Lab Gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings superior audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed.

In many AV applications requiring consistently outstanding performance, LUCIA offers a logical, cost-efficient and scalable solution that often eliminates the complications and added expense of a centralized equipment room. LUCIA amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable and highly efficient Lab Gruppen output stage, all of which make LUCIA the best-sounding and most reliable compact amplifier in its category.

LUCIA 120/2M has been designed and engineered for quick installation and easy setup. The supplied wall-mount bracket enables discreet on-wall location (such as behind video displays), but the ultra-compact form factor also allows easy placement virtually any place – whether next to a projector or integrated into a reception counter, podium & lectern or bar area.

All input and output connections are on Euroblock screw terminals (with parallel unbalanced RCA connectors), and level setting is available on front-panel potentiometers. Advanced circuitry protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage.


  • Compact matrix amplifier which offers full output power across a range of loads with 2 x 60 W into 8, 4 or 2 Ohms
  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
  • 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs
  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*
  • Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
  • Optimized presets available for a wide range of loudspeaker models for fast configuration
  • Enhanced Bass Profile for extended LF response with small loudspeakers
  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
  • Efficient Class-D amplifier with low distortion and minimal heat dissipation
  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz
  • Intelligent fan control for silent operation at idle and at lower output levels
  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob
  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
  • Rackmount kit, pole-mount kit and wall panel kits available as accessories


SPECIFICATIONS

General

  • Number of amplifier channels 2
  • Max total output all channels driven: 120 W
  • Max output voltage per channel: 31 V peak
  • Max output current per channel: 5.5 Arms

Max output power (all channels driven)

  • 2 ohms: 60 W
  • 4 ohms: 60 W
  • 8 ohms: 60 W
  • 16 ohms: 30 W

Performance

  • THD 20 Hz - 20 kHz at 1 W into 8 ohms: <0.3%
  • THD at 1 kHz and 1 dB below clipping: <0.2%
  • Signal to Noise Ratio: >98 dBA
  • Channel separation (Crosstalk) at 1 kHz: >60 dBA
  • Frequency Response: 5 Hz - 22 kHz
  • Input impedance: 10 kOhm
  • Common Mode Rejection (CMR): 40 dB

Gain, Sensitivity and Limiters

  • VPL for 16 ohm mode: 31 Vpeak
  • VPL for 8 ohm mode: 31 Vpeak
  • VPL for 4 ohm mode: 22 Vpeak
  • VPL for 2 ohm mode: 15 Vpeak
  • Sensitivity, balanced input: 4 dBu / 1.23 Vrms
  • Sensitivity, RCA input: -2 dBu / 0.62 Vrms
  • Input headroom for clip, balanced 1: 12 dBu / 3.09 Vrms
  • Input headroom for clip, RCA 1: 6 dBu / 1.55 Vrms
  • Connectors and Buttons

    • Input connectors (per ch.): 3 - pin detachable screw terminals, electronically balanced
    • Input connectors (ch. 1 & 2): Unbalanced RCA type
    • Output connectors (per ch.): 2 - pin detachable screw terminals
    • Line-level output connectors (ch. 3 & 4): 3 - pin detachable screw terminals, electronically balanced
    • GPO (power state output) 2: Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off
    • RS232: Can be controlled and monitored by third parties via RS232 using both the GPI pins
    • USB: For firmware update and configuration for the matrix models
    • Level adjustment (per channel): Front panel potentiometer, detented from -inf to 0 dB

      Processing Features

      • Input processing block 3: Default with 16 parametric EQs
      • Mix matrix routing block 3: 4 in - 4 out mix-matrix controllable from GPI
      • Output processing block 3: 4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)
      • Two line level outputs 4: Each capable of driving 10 LUCIA devices in parallel
      • Latency from any input to any output: User adjustable from 9.15 to 137 ms
      • Other

        • Nominal voltage: 100 – 240 VAC
        • Operating voltage: 85 – 265 VAC
        • Mains connector: IEC inlet
        • Cooling: One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C
        • Auto mode: The power state is controlled automatically by the audio signal
        • Size Dimensions: W 216 mm (8.5”) x H 44 mm (1 U) x D 280 mm (11”)
        • Weight: 1.9 kg (4.2 lbs)
        • Finish: Black aluminum front and black steel chassis
        • Approvals: CE, CSA, CCC, PSE, FCC, Energy Star

  • Manufacturer: LAB.GRUPPEN
    Model: 990691011
    Warranty: See manufacturer website for details
    SKU: I384695-N-1-B
    UPC: 5706622017536