Everything in Music - Since 1958

Powersoft T902 2-Channel Power Amplifier

  • Our Price
  • Regular price $4,182.00


The New Benchmark For Cost-Effective Power Amplification - The Powersoft T902 2-Channel Power Amplifier

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between. MyPowersoft services are available for this product.

  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways
  • Full control with a PC running Armonia. Here it can be in mixed groups with advanced EQ together with other Powersoft products
  • Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoniaPlus



  • Number of channels: 2
  • Output power: Single channel mode (2, 4, 8 Ohms @ 4000W, 3200W, 1800W)
  • Bridge mode: 4, 8 Ohms @ 8000W, 6400W
  • Max output voltage/current: 175 Vpeak/110 Apeak

AC Main Power

  • Power supply: Universal, regulated switch mode with Power Factor Correction
  • Nominal power requirement: 100-240 V +/- 10%, 50-60 Hz
  • Operating voltage: 90 V - 264 V
  • Power consumption: 120 V/230 V
  • Idle: 33 W
  • 1/8 of max output power @ 4 Ohms: 1073 W/9.6 A; 1068 W/5.3 A


  • Operating temperature range: 0 ° - 45 ° C; 32 ° - 113 ° F
  • Thermal dissipation: 120 V/230 V
  • 1/8 of max output power @ 4 Ohms: 931 BTU/h; 913 BTU/h


  • Gain: 32dB
  • Input sensitivity: 3.10 Vrms
  • Max input level: 24dBu
  • Frequency response: 20 Hz - 20 kHz ( ±0.5 dB) @ 1 W, 8 Ohms
  • S/N ratio: greater than; 110 dB (20 Hz - 20 kHz, A weighted)
  • Crosstalk separation: less than -70 dB @ 1kHz
  • THD+N: less than 0.1% (typical less than 0.5%)
  • IMD: less than 0.1% (typical less than 0.5%)
  • Input impedance: 20 kiloohms balanced


  • AD Converter: 24 Bit Tandem @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
  • DA Converter 24 Bit Tandem @ 48 kHz 117 dB-A Dynamic Range - 0.003% THD+N
  • Memory/presets: 256 MB (RAM) plus 512 MB flash for presets
  • Input equalizer: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  • Crossover: linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  • Delay: 2 s (input) + 100 ms (output) for time alignment
  • Limiters: TruePower, RMS voltage, RMS current, Peak limiter
  • Damping control: Active Damping Control and Live Impedance measurement

Front Panel

  • Indicators and Controllers: 8 x Push-button - Setting operating parameters
  • 1 x Display - Settings and monitoring
  • 1 x Power switch -


  • AC main: 1 x IEC C20 connector - 20 A max (region-specific power cord provided)
  • Audio signal input: 2 x XLR - Signal input
  • Loudspeakers: 2 x speakON - Neutrik NL4MD
  • Network/data: 1 x Rj45 socket - RS485 data connection (non-DSP version)
  • 1 x Rj45 socket - DANTE


  • Dimensions (L x H x W): 484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
  • Weight: 7.8 kg (17.2 lb)

Manufacturer: Powersoft Audio
Model: T902
SKU: I669606-N-1-WHXE

We are Chuck Levin's Washington Music Center

Maryland, Virginia, and Washington DC's legendary music shop. Family-owned and operated since 1958. Buy gear the way it was meant to be bought, from a store that's been there through it all and has the vibe to prove it. We're staffed with musicians and industry experts, people that live and breathe music gear. Our mission is to help you find the right gear for your project, that thing that will bring you the most joy out of what you do. We're an authorized dealer for almost every brand, we stock items the other stores don't, so you can try before you buy. Stop by our Wheaton, MD showroom and see for yourself.

Contact us if you have questions about one of our listings or if you need help finding the right piece of gear.