Rane RAD26 Misc. Audio Processors - Mint, Open Box


  • Our Price
  • Regular price $599.95





*IN STOCK - READY TO SHIP


Control at the Palm of Your Hands - The RAD26 One-Room RAD Remote

The RAD26 provides any room with end user control via the color LCD display and rotary encoders. It also features a dual universal audio I/O interface, line-level input jacks for local needs, a headphone output, and a dual 4-watt amp all using using one shielded cat5e (or better) cable drop. Three logic closure inputs and three active-low outputs add to the control capabilities. The built-in amplifier powers a small stereo pair of room speakers, or it can be switched in software to power a single 8-watt speaker. The RAD26 provides enough I/O and control to support one room in a HAL audio system which may require...


  • Local audio line input (smartphone, laptop, MP3, DVD)
  • One or two microphone or line-level inputs
  • Amplifier outputs for ceiling speakers
  • Level control
  • Source selection

On the rear, there are 2 balanced Euroblock Mic/Line/Line-Plus audio inputs with the mode set in Halogen software. The Line-Plus inputs accept unbalanced left and right signals, and sums them to mono. Also, 24V phantom power is available for condenser mics. For end users, there is a 3.5 mm Aux input on the underside of the front, accepting the output of a smartphone, laptop or other consumer device.

Balanced line outputs can drive an external amplifier or powered subwoofer for more output.

Software logic senses an inserted connector at the Aux In or Headphone jacks to optionally override the rear connections.

The RAD26 fits with most decor in a matte white metal box. A programmable ambient light sensor automatically dims the display and status LEDs in darkened rooms.

Screw the included wall-mount bracket over U.S. (or international) electrical boxes - or flush mount the DR6 with the bracket, and a 2" (5 cm) square hole in the wall to accommodate the cable.


SPECIFICATIONS

Indicators

  • Signal: -50 dBFS, limit typical, unbalanced/balanced output, green LED, peak-reading
  • Overload: -0.5 dBFS, limit typical, unbalanced/balanced output, red LED, peak-reading

Microphone Input

  • Input Impedance: 2.16 kiloohms, limit typical, balanced 1.08k + 1.08 k
  • Gain Range (dynamic mode): 30 - 50 dB, limit typical, in 1 dB steps
  • Gain Range (condenser mode): 18 - 38 dB, limit typical, in 1 dB steps
  • Maximum Input (dynamic mode): -16 dBu, limit typical, -18 dBV, balanced, Gain=30dB
  • Maximum Input (condenser mode): -4 dBu. limit typical, -6 dBV, balanced, Gain=18dB
  • Equivalent Noise Input: -126 dBu, limit typical, 20 kHz BW, Rs=150 ohms, Gain=30dB
  • CMRR: -70dB, limit maximum, RS=150 ohms, 1 kHz, Gain=30dB
  • Frequency Response: 20-20k Hz, limit typical, +0 / -0.5 dB, at all Gain settings
  • THD+N: 0.008% typical, at 1 kHz, 20 kHz BW, Rs=150 ohms, Output= -6dBFS, Gain=30dB
  • Phantom Power: 24V, limit 2%, 10mA max, always on in Condenser Mic Mode

Balanced Line-Level Input

  • Input Impedance: 10 kiloohms, limit 1%, balanced
  • Gain Range: 0 - 20 dB, limit typical
  • Maximum Input Level: 14 ohms, limit typical, 1 kHz
  • Frequency Response: 20 - 20k dB, limit typical, +0 / -0.5 dB
  • Dynamic Range (input): 103 dB, limit typical, re: 0 dBFS, 20 kHz BW, A-weighted
  • THD+N: 0.008% typical, at 1 kHz, 20 kHz BW, Rs=150 ohms, Output= -6dBFS, Gain=30dB
  • Line-Plus Mode: Active Summer, Left ("+") and Right ("-") signals summed to zero
  • Max Input Level L+R: 14 dBu, limit maximum, 12 dBV

Auxiliary Input

  • Gain: 0-20 dB, limit typical, in 1 dB steps
  • Max Input Level: 12 dBu, limit maximum, 10 dBV
  • Dynamic Range (input): 101 dB, limit typical, re: 0 dBFS, 20kHz BW, A-weighted
  • Frequency Response: 20-20k, +0 / -0.5 dB, at all Gain settings
  • THD+N: 0.008% typical, at 1 kHz, 20 kHz BW, Rs=150 ohms, Output= -6dBFS, Gain=0dB

Balanced Line-Level Output

  • Output Impedance: 200 ohms, limit 1%, each leg
  • Max Output Level: 14 dBu, limit minimum, less than 1% THD, Load = 10 kiloohms
  • Dynamic Range: 104 dB, limit typical, re: 0 dFBS, 20 kHz BW, A-weighted
  • Frequency Response: 20 - 20k dB, limit typical, +0 / -0.5 dB, at all Gain settings
  • THD+N: 0.01% typical, at 1 kHz, 20 kHz BW, Rs=150 ohms, Output+ -4 dBu, RAD26 Input to Output

Headphone Output

  • Maximum Output: 130 mW, limit typical, per channel, Rload= 32 ohms
  • Minimum Load: 32 ohms

Amplifier Outputs

  • Max Output Power (Dual Mode): 4W, limit maximum, 8 ohm load, less than 0.1% THD, both channels
  • Max Output Power (Single Mode): 8W, limit maximum, 8 ohm load, less than 0.1% THD, Ch.1 only, Ch.2 disabled
  • Dynamic Range: 99 dB, limit typical, re: 0 dBFS, 20 kHz BW, A-weighted, Dual 4W Mode
  • Frequency Response: 20 - 20k Hz, limit typical, + 0 / -0.5 dB, at all Gain settings
  • THD+N: 0.02% typical, at 1 kHz, 20 kHz BW, Rload=8 ohms, Output=1W

Dimensions

  • Size: 5.87 x 4.53 x .87" (149 x 115 x 22.5 mm)
  • Weight: 1.36 lb (617g)

Manufacturer: Rane
Model: RAD26
Warranty: See manufacturer website for details
SKU: I438758-GA01-2
UPC: 694318023112